Always top notch. I'll be back, as usual.

The Slixshot nipples corrected the problem of caps blown back under the hammer.

I have purchased three sets for my different revolvers. Better quality than those that came with the revolvers. They help with the "cap sucking" issue on the Colt repros. I also like that they are stainless steel which eliminates the worry about potential rusting after washing. The thing that really makes me happy about these nipples is that they accept Remington #10, CCI # 11 and RWS 1075 caps, because these days you have to settle for any percussion caps you can find. I've tried all of these caps and they fit snug.

They also fit 1862 Police and Navy; which make good trail guns. Carry one every day.

Excellent product. The first step in curing the problem with fired percussion caps coming off and falling in the action on this pistol. I was able to fire 5 rounds without stopping to remove a fired cap from the action. After some research I still plan to install a stronger hammer/main spring.

That little hole in the nipple makes a big difference, no more caps falling off.

After installing the SlixShot nipples on my black powder pistols the reliability increased 100 percent. Caps don't fall into the action any more. Haven't had a cap fall off or foul. They really do work as advertised. Great product!

These nipples made my 1862 pocket navy work like a champ. No cap jams and no other issues, just consistent firing every time.

Uberti Pocket Police .36 cal purchased on sale from Midway. Beautiful revolver, but a POS mechanically. SliX did not improve performance. SliX purchased for ASM 51 Navy performed very well compared to OEM nips. I got the ASM in a trade. Made in 1995, never fired. Excellent, well built, accurate revolver; like my Pietta 58 Remington. Uberti SUX...ever since Beretta purchased them...

Just love this product have them on all 10 of my Revolver's.

Slixshot are slightly longer than stock. This may cause the action to jam. May not. Depends on pistol. They are easy to modify if necessary.

Reply from Slixprings:

Some of the older Uberti Pocket Revolvers used a slightly shorter nipple. If this is the case we can swap them out for a shorter version.

Cured the cap jams in my Uberti 1862 Police Pocket Pistol!!👍

Uberti 1862 pocket police replica, a good gun but the caps always fall off no matter what I used. One properly sized set from Slix Shot and no problem any more.

Just took my Uberti 1849 pocket model out with the new SliXshot nipples today and i have to say that they are a great improvement over the factory nipples. The 49 is known for cap jams and these cured 50% of the problem. I still need to install a stronger main spring to cure the rest of the problem but the SliXshots helped for sure.

Very happy will buy again

I use these in all my BP guns...both rifles and pistols. Highly recommended!

As with most Colts my 1849 pocket Wells Fargo model was having trouble with spent caps jamming up the works. Installed a set of slixshot nipples and like magic the little gun ran like a modern cartridge gun after a little over 100 rounds things started hanging up again, but I think it was due to needing a cleaning than anything. Couldn’t be more pleased with the Slixshot nipples

Nipples would not fit new 1862 pocket revolver; had to put them in another pistol.

Reply from Slixprings:

We sent this customer a shorter set of nipples that should fit. A very small percentage of these revolvers have tighter tolerances and our standard size cones may be a tad too tall.

These work great on my revolver. They help reduced cap jams and caps fit better.

Replaced original cones on a Uberti 1862 Navy. installation was easy especially with Slixshot nipple wrench. Used paper cartridges and #11 caps a n d gad perfect ignition throughput my range session of 36 rounds. Great and reliable product.

Made a big change in cap jams. I’m very pleased.I also have slix shot nipples on my 1851 Navy and 1849 colt pocket pistol. They make a huge good change in reliability.

Very much recommend these

Thank you for your Excellent products / service.

I put these in first thing. They improved the funtioning of the revolvers so much...makes huge differance

WORKED GREAT! HAD NO CAP JAMS. I FIRED 20 ROUNDS THROUGH THEM.