SliXshot Black Powder Nipples Reviews for the product - SliXshot Black Powder Nipples -
1206 Product Reviews - Average rating 4.9 / 5 (Best Rated | Worst Rated | Most Recent | Oldest)
Modified cones
Stonebear - 02/21/2024
I have purchased Slixshot replacement nipples for several versions of my Pietta replica pistols and for both of my Uberti 1849 pocket pistols. It appears to me that the Slixshot have been engineered to accept #11 CCI percussion caps, which are the only size cap I can find these days. There is no longer an issue with caps falling off the nipples after seating on any of the pistols that I have installed Slixshot nipples on. The "cap sucking" problem has been rectified by modification of the hammer face, and is not connected to the problem of loose fitting caps that the new Slixshot nipples has cured.
I’ve ordered three sets for my three black powder revolvers
Wes Harden - 02/20/2024
The slixshot is a huge improvement over the nipples/cones that come stock on the revolvers. No jams ever for me. Stainless steel so no rust issues. Larger diameter opening to get spark to the powder gives a sure ignition.

The spent caps stuff off on rotation preventing any jams. Good purchase to give you better shooting performance.
Works great
Wayne - 02/19/2024
Ordered a set and did not fit. they were very helpful to get the right size. Great service.
Great Black powder nipples,
Larry - 02/17/2024
These are great they fit, caps stay on would buy them again
Iconic for a Reason
Lee David Engdahl - 02/17/2024
I ordered a set of these nipples for an old (40 year old) Pieta .36 Navy and a new .44 Army since received wisdom is that these make cap and ball revolvers of this ilk foolproof. I have yet to pick them up post restante in California, but I do not doubt that they will be superior to the steel models I am using.

Parker, AZ
they are the best!
Domenico Anastario - 02/16/2024
trusted by shooters
Toms review
Thomas Finn - 02/15/2024
These are the greatest for my Remington
A+
Broke
John Partin - 02/11/2024
I was somewhat pleased until one of them broke off at the threads in my walker cylinder. That would it up for me. I took the rest out and threw them in the trash, then put factories back in. I won't try any more oranything else. It's a shame. I was impressed with the service which is well above average for this day and time

Reply from Slixprings:

All you had to do was simply contact us and we would have sent you a replacement. This is very rare for these to break but we would have warranted it. You didn’t even give us a chance to make it right.

Slixsprings Second to None!
Robert Ferris - 02/10/2024
I've played with black powder guns for 50 years and the Slixprings stainless nipples for my Confederate collection of single action reproduction revolvers are simply second to none. I could not be happier with Slixsprings stainless nipples.
Outstanding as expected
John D - 02/09/2024
Lightning-fast service.
Bought two more sets of Peitta nipples for my spare 1860 cylinders, and received them in three days.
Ive got slixshots on nearly all of my growing arsenal of C+B wheelguns, and thought the factory nipples are often pretty good, these are excellent and often turn a gun from an amusing toy that's fun to shoot between cap jams to a machine that properly spits lead and smoke, and is nearly cartridge gun reliable.
Works as advertised
Tim Perkins - 02/09/2024
I have these on 3 of my 4 BP revolvers and can't say enough good things about them. They definitely help with the cap sucking.
don't leave home without it
Piper Daly - 02/07/2024
All of my ML pistols have SliXshot nipples on them. Replacing the factory nipples is part of the process of cleaning and otherwise getting a new pistol ready to shoot. They make for quick, clean firing, blow the blasted cap off the nipple at the time of ignition, and greatly reduce the chance of a cap jam.
Best all around
Curtis Rich (Capt. Baylor in SASS) - 02/07/2024
I became involved with these nipples when they first came out. The developers explained that the tiny 90-degree holes in the sides were to minimize back pressure. One of the reasons for heavy hammer springs is to keep the hammer from opening up and allowing the caps to come off the nipple and lock up the action. These cured it. Immediately I could use lighter hammer springs, I had several springs and inserted the lightest, then heavier, etc. until it worked. Since I was using a worn out, out of warranty thumb this extended my ability to shoot Frontiersman by years
For a full review of guns using them and more see “Captain Baylor’s Big Bad Book on Cowboy Action Shooting”

Book available here: Captain Baylor’s Big Bad Book on Cowboy Action Shooting
Product is legendary.
Me - 02/06/2024
FJB!
Just the best
RCT - 02/06/2024
Your black powder nipples are the gold standard.
Also, your nipple wrench makes all others look like junk. As a mechanic friend once said, the competition must be made of "cheese" the way they fail.
Thanks!
Perfect fit
Matt - 02/05/2024
I have yet to live fire my Uberti 1851 Navy, but the fit of the nipples is perfect and pair well with the CCI 11 caps. Cylinder moves freely with the caps in place. The original nipples would bind the Cylinder with the caps.
Outstanding
Tpierce - 02/04/2024
I have two sets so far and will order more later
I purchased two sets for my two 1851 Navy
Wesley Harden - 02/04/2024
I have purchased a set for each of my two 1851 Navy 44 revolvers. I’m able to shoot with no cap problems or jams. I’m very impressed with the performance of these nipples. My #11 CCI grip the nipples perfectly.
Euroarms 1851 Navy
Steve C. - 02/02/2024
Ordered nipples listed to fit Euroarms revolvers. Nipples nicely machined, and correct thread but too long for either my 1971 or 1974 mfg navy revolvers. Package marked for Pietta revolvers. Maybe my next acquisition will be a Pietta so I can give the nipples a fair test.

Reply from Slixprings:

Simply return the nipples and we can exchange them for the correct ones. Your older model must have used a shorter nipple which we have.

Service Above and Beyond
Black Powder Owner - 01/29/2024
The first nipples sent did not fit my revolver. However I was able to return them along with one of the old nipples and they found the correct match and shipped back to me. Great service.
ski shot Nipples
Jeff baird - 01/29/2024
I am very satisfied with these BP nipples with very limited use so far. My option on them may change (either way) when I’ve had the opportunity to use them more .
wow part 2
Andrew Smith - 01/28/2024
a very good and excellent product
Slixsprings Nipples
M Miller - 01/27/2024
I have been using these for years. They are top quality and are the only nipples I use in my BP revolvers. Stock up and enjoy shooting.
Black powder nipples
Robert Navarro - 01/27/2024
Wonderful product! Work like a charm. No cap jams at all and at a fair price!
Good fit for caps.
Francis Edward Cassano - 01/25/2024
I use these on all my BP revolvers. #11 and 1075 caps seat very well and the stainless nipples are very easy to clean up.

These products are recommended with items in your cart.

SliX Wrench
Price$25.00
SliX Hand
Price$29.50