Easy install of the lever springs. Made the action feel smooth and operate flawlessly. Only issue was a slight interference between spring on the lever side and the linkage. Fixed it easily. Looking forward to years of smooth action.

These springs were an easy replacement for the truck springs that come in your Uberti.
A small amount of fitting was needed on the carrier spring to not interfere with the side gate, and to increase the spring tension.
I’m very pleased with the results.

My SliXprings required some hand-fitting, as is noted in the instructions. I had to file down the spring ends by maybe .5mm and rounded them off a bit. When I had them installed I realized the carrier arm on my 1873 was binding on the width of the spring base. I also needed to file that down a bit to allow the arm to properly slide into the down position. Upon disassembly I have had to re-file the spring bases again to allow for the arm to move properly. It may take multiple times before everything moves properly. Once you have the springs filed to where they need to be they are fantastic! Highly recommended, as long as you know what you are doing.

Got the Slix springs in the mail the other day, shipping was 3 days , I took my '73 apart and followed the directions
that came in the package, they replaced the other aftermarket springs that were getting weak. Made a marked improvement in the way the rifle worked. I would recommend these, easy to install.

Fast shipping, I’m not a gunsmith but the installation well pretty easy and made a heck of a difference in the smoothing out of the action on my rifle, since then I’ve probably put 300 rounds through the rifle without any problems so a big thumbs up to slixprings